Symmetricom TimeCreator 1000 User Manual page 264

Appendix B Command Descriptions and Communications Interface
CLI Commands
Upgrade
Use this command to upgrade the specified modules firmware with the specified
filename. The system can download the file from an http, ftp, or sftp server. If the
optional keyword "auto-reboot" is added, then the upgraded card will reboot after
being upgraded. IOC cards will verify that there is a standby IOC card available
before rebooting. The new firmware is not used until the card is rebooted.
Command Syntax:
upgrade {imc|ioc|ioc1|ioc2} filename server {ftp|sftp|http}
[auto-reboot]
The user will be prompted for the username and password for the server.
Example:
To upgrade IOC1 with the file "ver2.bin", which is located at server IP address
192.168.5.64, via FTP, and then to auto-reboot IOC1 afterwards:
tc1000>upgrade ioc1 ver2.bin 192.168.5.64 ftp auto-reboot
Level : Admin only
264 TimeCreator 1000 User's Guide 097-93100-01 Revision C – February, 2010