Symmetricom TimeCreator 1000 User Manual page 137

Table A-2. System Notification Messages - Alarms (Continued)
Trap Name
Index
(trapID)
20 PWRFANFAIL
21 NOIOC
22 JAMSYNC
23 DCMUNLOCK
24 PLLUNLOCK
097-93100-01 Revision C – February, 2010
Severity Trap Messages
(default) (trapDescription)
Major Power Module
<#> fan failure
Power Module
<#> fan failure
cleared
Minor No IOC module
in system
One or more IOC
modules in
system
Minor Jam sync
required
Jam sync
completed
Major IOC <#> DCM
unlocked
IOC <#> DCM
locked
Major IOC <#> PLL
unlocked
IOC <#> PLL
locked
Appendix A Alarms, Events and SNMP Traps
Description
The fan of power Check fan and if
module A or B not spinning or
failed alarm persists
then replace
power module
The fan of power No action required
module A or B is
ok
Both IOC Insert IOC module
modules are
removed
At least one IOC No action required
module in the
system
Need to jam Run the "sync
sync the IOC TOD-source now"
module command
Jam sync of IOC No action required
module is
completed
Distributed clock Hardware failure,
module has contact
become Symmetricom tech
unlocked support
Distributed clock No action required
module has
become locked
Phase clock Hardware failure,
module has contact
become Symmetricom tech
unlocked support
Phase clock No action required
module has
become locked
TimeCreator 1000 User's Guide 137
Alarm Messages
Corrective
Action