Symmetricom TimeCreator 1000 User Manual page 188

Appendix B Command Descriptions and Communications Interface
CLI Commands
set authentication tacacs+ {enable | disable}
To provision the RADIUS server IP address (port # is optional):

set authentication radius address <address>[:<port#>]
To provision the RADIUS server authentication key for server access:

set authentication radius key <key string>
To provision the TACACS+ server IP address (port # is optional):

set authentication tacacs+ address <address>[:<port#>]
To provision the TACACS+ server authentication key for server access:

set authentication tacacs+ key <key string>
Example 1:
To enable RADIUS authentication:
set authentication radius enable
Example 2:
To enable TACACS+ authentication:
tc1000>set authentication tacacs+ enable
Example 3
To provision the RADIUS server IP address to 192.168.5.17, port 1812:
tc1000>set authentication radius address 192.168.5.17:1812
Example 4:
To provision the RADIUS server to authentication key "ABCDEFGHIJ12345678" for
server access:
tc1000>set authentication radius key ABCDEFGHIJ12345678
Example 5:
To provision the TACACS+ server IP address to 192.168.5.27, with no port
specified:
tc1000>set authentication tacacs+ address 192.168.5.27
Example 6:
To provision the TACACS+ server to authentication key "ABCDEFGH1234567890"
for server access:
188 TimeCreator 1000 User's Guide 097-93100-01 Revision C – February, 2010