Cli Commands - Symmetricom TimeCreator 1000 User Manual

Appendix B Command Descriptions and Communications Interface

CLI Commands

CLI Commands
This section provides an alphabetical listing of all CLI commands.
Show Alarms
This command displays a list of all standing (active) system alarms.
Command Syntax:
show alarms
Example:
tc1000>show alarms
Response:
DTI Port B reference is disqualified as system reference
Input Port B cable is disconnected
Level: User, Power-User and Admin
Remarks: The information displayed is expected to be identical to an entry in the
Event/Alarm Log File.
Related:
show status, generate message, show alarm-threshold, set
alarm-threshold
178 TimeCreator 1000 User's Guide 097-93100-01 Revision C – February, 2010