Structure Of This Guide - Symmetricom TimeCreator 1000 User Manual

Structure of This Guide

This guide contains the following sections and appendixes:
Chapter, Title
Chapter 1, Overview of the
TimeCreator 1000
Chapter 2, Engineering and
Ordering Procedures
Chapter 3, Installing the
TimeCreator 1000
Chapter 4, General Guidelines for
using the Symmetricom
TimeCreator 1000
Chapter 5, Provisioning
Chapter 6, Maintenance and
Troubleshooting
Appendix A, Alarms, Events and
SNMP Traps
Appendix B, Command
Descriptions and
Communications Interface
Appendix C, Installing the
Two-Way GPS Antenna
Appendix D, Specifications and
Factory Defaults
Appendix E, Software Licenses
Index
097-93100-01 Revision C – February, 2010
Provides an overview of the product, describes the major
hardware and software features, and lists the system
specifications.
Lists the part number and ordering procedure for all TimeCreator
1000 parts and accessories.
Contains procedures for unpacking and installing the system, and
for powering up the unit.
Provides basic information to which users can refer to ensure
proper system operation.
Describes the commands and procedures required to provision the
TimeCreator 1000 after installing the unit.
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Lists the alarms and events and provides basic indications of the
source of the alarm.
Describes the CLI command conventions, functions, and features
and the SNMP, NTP, SSH, and SFTP protocols.
Provides procedures for installing a GPS antenna and connecting
it to the TimeCreator 1000.
Lists the specifications for the TimeCreator 1000.
Contains licensing information for third party software.
Provides references to individual topics within this guide.
How to Use This Guide
Structure of This Guide
Description
TimeCreator 1000 User's Guide 17