Symmetricom TimeCreator 1000 User Manual page 151

Table A-5. TimeCreator 1000 Alarm Trap Details (Continued)
Trap Name
(trapID)
MTIETEXC
1.3.6.1.4.1.9070.1.2.4.1.100.2.15
MTIE35EXC
1.3.6.1.4.1.9070.1.2.4.1.100.2.16
PPJEXC
1.3.6.1.4.1.9070.1.2.4.1.100.2.17
FEREXC
1.3.6.1.4.1.9070.1.2.4.1.100.2.18
PWRFAIL
1.3.6.1.4.1.9070.1.2.4.1.100.2.19
PWRFANFAIL
1.3.6.1.4.1.9070.1.2.4.1.100.2.20
NOIOC
1.3.6.1.4.1.9070.1.2.4.1.100.2.21
JAMSYNC
1.3.6.1.4.1.9070.1.2.4.1.100.2.22
DCMUNLOCK
1.3.6.1.4.1.9070.1.2.4.1.100.2.23
PLLUNLOCK
1.3.6.1.4.1.9070.1.2.4.1.100.2.24
See Table A-6
The OID for alarms traps are of the format:
where x corresponds to index values that identify specific alarms. The digits shown
for the OID Index in
the full OID for each alarm.
Note: The ID in the Trap OID Name column in
used with the
tc1000>generate message
"id,trapAID1,trapAID2,trapState,trapValue"
If trapAID1 corresponds to the IOC module number,1 or 2, use the
value trapAID1=257 for IOC1 and trapAID2=258 for IOC2. Use the
number "0" for entries of "n/a".
Example
To generate the message for the trap "IMC-IOC 1 communication
failed", which has id=2, trapAID1=257 (corresponds to trapAID1=1 for
IOC1 in
tc1000>generate message "2,257,0,2,0"
097-93100-01 Revision C – February, 2010
OID
below for additional trap details, such as descriptions and bindings.
Alarm OID = 1.3.6.1.4.1.9070.1.2.4.1.100.2.x
Table A-6 below correspond to x. See
Generate Message
Table A-6)
trapAID2=0, trapState=2, and trapValue=0:
Appendix A Alarms, Events and SNMP Traps
Trap OID
Name
trapMTIETExceed
trapMTIE35Exceed
trapPPJitterExceed
trapFERExceed
trapPowerFail
trapPowerFanFail
trapNoIOC
trapJamSyncRequired
trapDCMUnlocked
trapPLLUnlocked
Table A-5
Table A-6
command to raise a specific trap:
TimeCreator 1000 User's Guide 151
SNMP Traps
Trap
Severity
Minor
Minor
Minor
Minor
Major
Major
Minor
Minor
Major
Major
for listings of
below is