Symmetricom TimeCreator 1000 User Manual page 246

Appendix B Command Descriptions and Communications Interface
CLI Commands
Set Root-recovery Autorecoverymode
This command is used to enable or disable the auto recovery mode (a global
setting) for root server recovery, or to abort the root server recovery process.
Note: This command is only applicable for a TimeCreator 1000 that is
being used as a root server in T
Command Syntax:
set root-recovery autorecoverymode [enable|disable|abort]
Example
To enable the auto recovery mode for root server recovery:
tc1000> set root-recovery autorecoverymode enable
Related:
show root-recovery config
Level : Power-User and Admin only
246 TimeCreator 1000 User's Guide
OD Source mode of USER
097-93100-01 Revision C – February, 2010
.