Cisco Asr 1000 Series Routers; Spa Subslot - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1000 Series Routers

•
•
•
Cisco ASR 1000 Series Routers
The Cisco ASR 1000 Series Aggregation Services Routers are the next generation Cisco midrange router
products. The Cisco ASR 1000 Series Aggregation Services Routers use an innovative and powerful hardware
processor technology known as the Cisco QuantumFlow Processor. The following are the Cisco ASR 1000
Series Routers:
• The Cisco ASR 1006 Router is a 12-SPA, 6-rack-unit (RU), hardware-redundant chassis with two
• The Cisco ASR 1004 Router is an 8-SPA, four rack-unit (RU) chassis with one ESP slot, one RP slot,
• The Cisco ASR 1002 Router is a 3-SPA, 2-RU chassis with one embedded services processor slot that
• The Cisco ASR 1002-F Router is a one half-height SPA, 2-RU chassis. The embedded services processor,
• The Cisco ASR 1013 Router is a 24 half-height shared port adapters, 13-RU chassis that can hold 6 SIPs
• The Cisco ASR 1001 Router is a one rack-unit chassis that offers a compact form factor router that
• The Cisco ASR 1002-X Router is a 3-SPA, 2-RU chassis. The embedded services processor and route
For the single-route-processor Cisco ASR 1000 platforms (Cisco ASR 1002, Cisco ASR 1002-F, Cisco ASR
1002-X and Cisco ASR 1004), the route processor has a dual Cisco IOS Software option that allows these
routers to use Cisco IOS software redundancy, Cisco high-availability features, and Nonstop Forwarding
(NSF). Single-route-processor Cisco ASR 1000 platforms do not support ISSU upgrade or downgrade. Instead
sub-package software upgrade is supported only if the router is running in sub-package mode.
The Software Redundancy feature requires the router to have 8 GB of DRAM memory.
Note
Cisco ASR 1000 Series Router Hardware Installation Guide
2
Field-Replaceable Units, page 7
Functional Overview, page 8
Cisco Product Identification Standard, page 17
Embedded Services Processor (ESP) slots, two Route Processor (RP) slots, and three SIP slots.
and two SIP slots.
comes with the route processor, Cisco ASR 1000 Series Shared Port Adapter Interface Processor (SIP),
and 4 Gigabit Ethernet ports built in. For more information about the type of connectors and cables used
by the 4-port Gigabit Ethernet built-in SPA, the
SIP and SPA Hardware Installation Guide
route processor, and SPA interface processor (SIP) are integrated with the chassis. In addition, 4 Gigabit
Ethernet ports are built into the chassis.
and provides superslots (more height and power) for the Cisco ASR1000-RP2s and Cisco ASR1000-ESPs.
The Cisco ASR 1013 Router is designed with two zones (Zone 1 and Zone 0) for redundancy and
superslot spacing. The Cisco ASR 1013 router has four 40G slots and two 100G slots.
satisfies customer demands such as low power consumption and decreased usage of rack space. The
Cisco ASR 1001 Router has the route processor, embedded services processor, and SIP integrated within
the chassis with one half-height SPA slot.
processor of this router are integrated in the chassis. There are six small form factor pluggable (SFP)
Gigabit Ethernet ports. Depending on the Cisco software license that you install, the router can provide
a forwarding bandwidth of 5 Gbps, 10 Gbps, 20 Gbps, or 36 Gbps.
Cisco ASR 1000 Series Routers Hardware Overview
Cisco ASR 1000 Series Aggregation Services Routers
.