Four-Post Rack Installation - Cisco ASR 1013 Hardware Installation Manual

Four-Post Rack Installation

The folowing image shows the Cisco ASR 1002-F Router on a two-post rack.
Figure 129: Installing the Cisco ASR 1002-F Router on a Two-Post Equipment Rack
1
Step 2 Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both sides of the
rack.
Step 3
Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack
or mounting strip.
Step 4 For each bracket, insert and tighten two screws to the rack on both sides.
What to Do Next
This completes the procedure for installing the chassis on a two-post rack. Proceed to the Attaching a Chassis
Ground Connection. to continue the installation.
Four-Post Rack Installation
The Cisco ASR 1002-F Router can be flush-mounted in a 19-inch equipment rack using the rack-mounting
kit provided with your system. When handling the chassis, always follow proper lifting practices. See the
"Chassis-Lifting Guidelines" section.
Cisco ASR 1000 Series Router Hardware Installation Guide
298
Rack equipment rail
Cisco ASR 1002-F Router Overview and Installation
2 Front rack-mount bracket ear
and holes