Overview: Cisco Asr 1000 Series Aggregation Services Routers Spas - Cisco ASR1004 - ASR 1004 Modular Expansion Base Hardware Installation Manual

Release No.
Cisco IOS XE
Release 2.4
Cisco IOS XE
Release 2.3
Cisco IOS XE
Release 2.2
Cisco IOS XE
Release 2.1
Organization
This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
xii
Revision Date
OL-14126-04 June 30, 2009
OL-14126-03 November 24, 2008
OL-14126-02 September 10, 2008
OL-14126-01 April 25, 2008
Title
SIP and SPA Product Overview
Overview: Cisco ASR 1000 Series
Aggregation Services Routers SIPs
Overview: Cisco ASR 1000 Series
Aggregation Services Routers SPAs
Preparing to Install a SIP or a SPA
Change Summary
• Information added for the following
SPAs:
2-Port, 4-Port, and 8-Port OC-12
–
POS SPA
1-Port OC-48 POS SPA
–
8-Port OC-3 POS SPA
–
– 1-Port OC-192 POS SPA
– Cisco WebEx Node for ASR
1000 Series
• New information on the use of SPA
cable clips to help with removal of
SPAs from a SIP on the Cisco ASR
1000 Series Routers was added.
Information added for the following
SPAs:
1-Port and 3-Port OC-3 ATM SPA
•
Information added for the following
SPAs:
2-Port and 4-Port OC-48c/STM-16
•
POS SPA
1-Port Channelized STM-1/OC-3
•
SPA
First release.
Description
Provides an introduction to SPA interface
processors (SIPs) and shared port adapters
(SPAs).
Provides SIP and SPA compatibility summary.
For each supported SIP, provides a summary of
SIP characteristics and a SIP overview.
For each supported SPA, provides a summary of
SPA characteristics and a SPA overview.
Describes the required tools, equipment, and
safety guidelines for installing SIPs and SPAs.
Preface
SPA
OL-14126-12