Cisco ASR 1013 Hardware Installation Manual page 577

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Before performing any of the following procedures, ensure that power is removed from the DC circuit.
Warning
Statement 1003
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
The following figure shows the ASR1006-PWR-DC power supply and components.
Figure 265: Cisco ASR 1006 Router DC Power Supply (ASR1006-PWR-DC)
1
2
3
4
5
Removing and Replacing a DC Power Supply in Cisco ASR 1006 Router
Fan 6
DB-25 alarm connector* 7
Tie-wrap tab 8
DC power supply 9
terminal block and plastic
cover
Ground symbol 10
Cisco ASR 1000 Series Router Hardware Installation Guide
DC power supply ground
studs
DC power supply captive
screw
DC power supply handle
On/Off (|/O) circuit
breaker switch
Power supply LEDs
543