Cisco Asr 1000 Series Router Installation Checklist - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1000 Series Router Installation Checklist

Component
Accessories Kit
Note
ESD, Wrist Strap (disposable)
Documentation
Optional Equipment
Most Cisco documentation is online or on the Cisco Documentation DVD. Documentation that ships with
Note
your Cisco ASR 1000 Series Router includes the Regulatory Compliance and Safety Information for the
Cisco ASR 1000 Series Aggregation Services Routers document, and the Documentation Roadmap for
Cisco ASR 1000 Series, which provides links and information for the Cisco ASR 1000 Series Aggregation
Services Routers documentation.

Cisco ASR 1000 Series Router Installation Checklist

To assist you with your installation and to provide a historical record of what was done by whom, photocopy
the Cisco ASR 1000 Series Router Installation Checklist shown in the following table. Use this to record
when each procedure or verification is completed. When the checklist is completed, place it in your site log
along with the other records for your new router.
Cisco ASR 1000 Series Router Hardware Installation Guide
136
You must order the Accessories Kit
separately if you order the Cisco ASR
1009-X Router or Cisco ASR 1006-X Router
chassis as a spare.
Preparing Your Site for Installation
Description
Front and rear chassis rack-mount brackets that you
will attach to the chassis with the respective screws
Three sets of screws, one set for:
• Front rack-mount brackets (use the black
screws)
• Rear rack-mount brackets (use the package with
the 5 screws)
• Cable-management brackets (use the package
with the 4 screws)
Two cable-management brackets with U-feature
design devices attached, with a different size for each
chassis.
1 RJ-45 to RJ-45 crossover cable
1 RJ-45 to DB-9 (female) adapter
One disposable wrist strap
Regulatory Compliance and Safety Information for
the Cisco ASR 1000 Series Aggregation Services
Routers at http://www.cisco.com/c/en/us/td/docs/
routers/asr1000/rcsi/asr1rcsi.html.
Power cord if an AC power supply was shipped.
There are none for the DC power supply units.