Cisco ASR 1013 Hardware Installation Manual page 479

Cisco ASR 1001 Router Overview and Installation
The following image shows both the AC and DC power supplies for the Cisco ASR 1001 Router.
Figure 214: Cisco ASR 1001 Router AC Power Supply and DC Power Supply
1
2
3
4
The following table describes the power supply LED. The function of the LED is the same for both the AC
and DC power supplies.
Table 88: Cisco ASR 1001 Router AC and DC Power Supply LED
LED Color and State
Solid green
Blinking green, at the rate of one blink per second
Solid amber
AC and DC power supply 5
fasteners
AC power supply inlet 6
Power supply LED 7
DC power supply 8
negative (-) connection
Description
Power output is on and within the normal operating
range.
Input power that is within the normal operating range
is being supplied, but the Standby switch is in the
Standby position (and not in the On position).
A power supply critical event has occurred, and the
power supply has shut down. The critical event can
be temperature, voltage, current, or fan operating
outside the normal operating range.
Cisco ASR 1000 Series Router Hardware Installation Guide
Cisco ASR 1001 Router Power Supply Installation
DC power supply positive
(+) connection
DC power supply ground
symbol
DC power supply
terminal block connection
AC and DC power supply
handles
445