Power Supplies in the Cisco ASR 1002 Router
the DC input wiring. The connection order is negative (–), positive (+), and GND. The DC power supply is
secured into the system chassis with two captive screws mounted on the faceplate.
The following image shows the –48 VDC Power Supply for the Cisco ASR 1002 Router.
Figure 85: – 48 VDC Power Supply for the Cisco ASR 1002 Router
1
2
3
4
5
The Cisco ASR 1002 Router –48 VDC power supply LEDs are described in the following table.
Cisco ASR 1000 Series Router Hardware Installation Guide
228
Chassis ESD socket
6
Power supply slot 0 label
7
Power supply switch
8
Standby/On (|)
Power supply LEDs
9
Fan
10
Cisco ASR 1002 Router Overview and Installation
Power supply captive
installation screw
Power supply slot 1 label
Ground lead
Positive lead
Negative lead