Rear View
The following image shows the rear of the Cisco ASR 1004 Router with two –48 VDC power supplies installed.
Figure 60: Cisco ASR 1004 Router Rear View With – 48 VDC Power Supplies
1
2
3
4
Internal fans draw cooling air into the chassis and across internal components to maintain an acceptable
operating temperature. (See
183.) The fans are located at the rear of the chassis. A two-hole grounding lug is located on the side of the
chassis. Two power supplies, either two AC power supplies or two –48 VDC power supplies, are accessed
from the rear of the router.
You have already unpacked your chassis and read all the site requirements for your new equipment.
Note
Proceed with the installation.
Note
Do not combine AC and –48 VDC power supplies in the same chassis.
Cisco ASR 1000 Series Router Hardware Installation Guide
184
–48 VDC power supply
5
terminal block
–48 VDC power supply
6
LEDs
–48 VDC power supply
7
DB-25 alarm connector
–48 VDC power supply
—
fan
Figure 59: Cisco ASR 1004 Router Rear View with AC Power Supplies, on page
Cisco ASR 1004 Router Overview and Installation
Grounding symbol
–48 VDC power supply
On/Off switch
–48 VDC power supply
handle
—