Cisco Asr 1002-X Router Bits Port Signals And Pinouts; Cisco Asr 1002-X Router Bnc Gps Ports - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1000 Series Router Specifications
Pin
7,8

Cisco ASR 1002-X Router BITS Port Signals and Pinouts

The following table lists the pinout of the front panel Building Integrated Timing Supply (BITS) RJ45 port
on the Cisco ASR 1002-X Router.
Table 115: BITS RJ-45 Interface Pinouts for Cisco ASR 1002-X Router
Pin
1
2
3, 4
5
6
7,8

Cisco ASR 1002-X Router BNC GPS Ports

The following table describes the BNC GPS ports on the Cisco ASR 1002-X.
Table 116: GPS Port Pinout
Signal Attribute
Waveform
Amplitude
Impedance
Pulse Width
Signal Direction
N/C —
Signal Direction
RX Ring Input
RX TIP Input
N/C —
TX Ring Output
TX TIP Output
N/C —
10 Mhz (input and output)
Input—Sine wave
Output—Square wave
Input— > 1.7 volt p-p(+8 to +10
dBm)
Output— > 2.4 volts TTL
compatible
50 ohms
50% duty cycle
Cisco ASR 1000 Series Router Hardware Installation Guide
Cisco ASR 1002-X Router BITS Port Signals and Pinouts
Description
—
Description
Receive Ring
Receive TIP (T1/E1)
Not used
Transmit Ring
Transmit TIP (T1/E1)
—
1PPS (input and output)
Input—Pulse shape
Output—Pulse shape
Input— > 2.4 volts TTL
compatible
Output— > 2.4 volts TTL
compatible
50 ohms
26 microseconds
629