Cisco ASR 1013 Hardware Installation Manual page 373

Cisco ASR 1002-X Router Overview and Installation
SUMMARY STEPS
1. Locate the threaded holes on the rear side of the chassis. Ensure that you hold the rear rack mount bracket
with the ear and holes facing outward and towards the rear of the chassis.
2. Position the rear rack mount bracket top hole with the chassis top hole from the back.
3. Insert and tighten the screws on one side.
4. Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the rear
rack mount brackets to the chassis.
DETAILED STEPS
Step 1 Locate the threaded holes on the rear side of the chassis. Ensure that you hold the rear rack mount bracket with the ear
and holes facing outward and towards the rear of the chassis.
The following image shows where to attach the rear rack mount brackets to the Cisco ASR 1002-X Router.
Figure 155: Attaching the Rear Rack Mount Brackets to the Cisco ASR 1002-X Router
1
2
Step 2 Position the rear rack mount bracket top hole with the chassis top hole from the back.
Step 3 Insert and tighten the screws on one side.
Step 4 Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the rear rack mount
brackets to the chassis.
What to Do Next
This completes the steps for attaching the rear rack mount brackets to the Cisco ASR 1002-X Router.
Rear rack mount bracket ear
and holes
Rear rack mount bracket
Cisco ASR 1000 Series Router Hardware Installation Guide
Chassis Rear Rack Mount Brackets
3
—
Rear rack mount bracket
screws
—
339