Cisco ASR 1013 Hardware Installation Manual page 454

Cisco ASR 1001 Router Components
• Redundant Cisco route processor is not supported.
• Network clock changes. No second BITS clock input supported.
• A built-in 4xGE SPA is included. This shared port adapter provides four SFP-based GE connections.
The Cisco route processor common LEDs and indicators are shown in the "Common LEDs for Cisco ASR
1001 Route Processor" figure in the Cisco ASR 1001 Router Architecture section. The following table describes
the Cisco ASR 1000 Series Route Processor LEDs.
Table 81: Cisco ASR 1001 Series Route Processor LEDs
LED Label
PWR
STAT
CRIT
MAJ
MIN
BOOT
LINK
Cisco ASR 1000 Series Router Hardware Installation Guide
420
LED
Power
System status
Critical
Major
Minor
Internal eUSB bootflash LED
10/100/1000 Interface LED
Cisco ASR 1001 Router Overview and Installation
Color—State
Solid green
Off
Solid green
Yellow
Red
Solid Red
Solid Red
Amber
Green
Solid green
Flashing Green
Off
Behavior Description
All power requirements are
within specification
Off. The router is in standby
mode.
Cisco IOSD and other required
processes have loaded
successfully and are operating.
ROMMON is running
(including a permanent failure
of RP software) or the Process
Manager has declared a critical
RP process (including IOSD)
dead. A user can log in to
recover.
Occurs during system failure or
power-up.
Functions as a critical alarm
indicator. The LED is lso a solid
red during the boot process.
Major alarm indicator.
Minor alarm indicator.
Activity indicator.
Link with no activity.
MGMT Ethernet port activity.
No link.