Cisco ASR 1013 Hardware Installation Manual page 315

Cisco ASR 1002-F Router Overview and Installation
2
3
4
5
The following image shows the labels for the Cisco ASR 1002-SIP10-F SPA interface processor (SIP). The
ASR 1002-F router has only one half-height removable SPA.
Figure 121: Cisco ASR 1002-SIP10-F SPA Interface Processor
1
2
3
The Cisco ASR 1002-F Router SPA has three types of LEDs: two LEDs for each port on the SPA and one
STATUS LED, as shown in the following image.
Figure 122: Cisco ASR 1002-F Router SPA Faceplate
1
2
The following table describes the Cisco ASR 1002-F Router SPA LEDs.
Cisco Integrated RP and Cisco ASR 1002-ESP-F Description
BITS 7
MGMT 8
AUX 9
Cisco integrated ASR 10
1002-SIP10-F LEDs:
PWR, STAT
Cisco ASR 1002-SIP10-F 4
SPA STATUS LED 5
Port 3 6
C/A (Carrier/Alarm) 3
A/L (Active/Loopback) —
Cisco ASR 1000 Series Router Hardware Installation Guide
LINK
CARRIER
BOOT
Cisco integrated RP
STAT LED
Port 2
Port 1
Port 0
SPA STATUS
—
281