Cisco ASR 1013 Hardware Installation Manual page 201

Cisco ASR 1006 Router Overview and Installation
SUMMARY STEPS
1. At the rear of the chassis, check whether the power switch on the power supply is in the Standby position.
2. Plug the power cable into the inlet.
DETAILED STEPS
Step 1
At the rear of the chassis, check whether the power switch on the power supply is in the Standby position.
Step 2 Plug the power cable into the inlet.
For additional AC power cable strain relief, secure the cable to the power supply handle by inserting a nylon
Note
cable tie through the hole in the handle and around the cable.
The following image shows the ASR1006-PWR-AC power supply of the Cisco ASR 1006 Router.
Figure 47: Cisco ASR 1006 Router AC Power Supply (ASR1006-PWR-AC)
1
2
3
4
The following image shows the ASR1013/06-PWR-AC power supply of the Cisco ASR 1006 Router.
AC power supply fan
DB-25 alarm connector
Tie-wrap tab
AC power supply captive
screw
Cisco ASR 1000 Series Router Hardware Installation Guide
Connecting AC Input Power to Cisco ASR 1006 Router
5
6
7
8
AC power supply handle
AC power inlet
AC power supply Standby
switch
AC power supply LEDs
167