Cisco ASR 1013 Hardware Installation Manual page 214

Attaching Cable Retention Bracket on AC Power Supply
DETAILED STEPS
Step 1 Remove the two M3X5mm screws and discard.
Step 2 Install AC cord retainer by inserting tabs into lance features on panel.
Step 3
Secure AC cord retainer with two M3X8mm screws included in kit.
Step 4 Connect AC power cord.
Step 5 Secure AC cord by tightening retainer screw.
What to Do Next
Cisco ASR 1000 Series Router Hardware Installation Guide
180
Cisco ASR 1006 Router Overview and Installation