Two-Post Rack Installation - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1006 Router Overview and Installation

Two-Post Rack Installation

The Cisco ASR 1006 Router can be installed in a two-post rack, either 19 inch or 23 inch. The following
image shows the router installed on a two-post rack.
Figure 43: Installing the Cisco ASR 1006 Router in a Two-Post Equipment Rack
1
Inner clearance (the width between the inner sides of the two posts or rails) must be at least 19 inches
Note
(48.26 cm). The height of the chassis is 10.45 inches (26.543 cm). Airflow through the chassis is from
front to back.
Caution If you are using a two-post rack secure the rack to the floor surface to prevent tipping and avoid bodily
injury and component damage.
Cisco ASR 1006 Router 2
front rack-mount bracket
Cisco ASR 1000 Series Router Hardware Installation Guide
Two-Post Rack Installation
Two-post equipment rack
rail
155