A Initialization Parameters; A1 Initialization Set-Up - YASKAWA VS-616G5 Series Programming Manual

Main Menu: Initialize
A Initialization Parameters
A1 Initialization Set-up
A1-00 Language Selection
Select the language displayed on the digital operator according to the following table:
A1-01 Parameter Access Level
This parameter allows the "masking" of parameters according to user level. See the following table:
Setting
0
1
2
3
4
A1-02 Control Method Selection
Select the control method best suited for your application.
Setting
0
1
2
3
VS-616G5 Programming Manual
<ENTER>
Setting
0
English (factory default)
1 Japanese
2 Deutsch
<1110>
3 Francais
<1110>
4 Italiano
<1110>
5 Espanol
<1110>
6 Portugues
<1110>
Operation Only
User Program - Accesses parameters selected by OEM (A2-01 to A2-32).
Quick Start Level (factory default) - For maintenance-level programming.
Basic Level - For basic programming in most applications.
Advanced Level - For advanced programming in special applications.
V/f Control - For general-purpose and multiple motor applications.
V/f with PG Feedback - For general-purpose applications requiring closed
loop speed control.
Open Loop Vector (factory default) - For applications requiring precise
speed control, quick response and higher torque at low speeds (150%
torque below 1Hz).
Flux Vector - For applications requiring very precise speed and torque con-
trol at a wide speed range including 0 speed. Uses encoder feedback.
Section A: Initialization Parameters
Select Language
Description
Access Level
Description
Control Method
Description

A1 Initialization Set-up

Open Loop Flux
V/f V/f w/PG
Vector Vector
Q Q Q Q
Q Q Q Q
Q Q Q Q
9