Show Keepalive Statistics - Dell N1100-ON Reference Manual

Field
Transmit Interval
Retry Count
Command History
Implemented in version 6.3.0.1 firmware. Example updated in 6.4 version.
Example
console#show keepalive
Keepalive Service.............................. Enabled
Transmit Interval.............................. 10
Retry Count.................................... 3

show keepalive statistics

Use the show keepalive statistics command to display the loop protect status
for one or all interfaces.
Syntax
show keepalive statistics {interface-id | all}
• interface-id
interface.
—
• all Displays statistics for all interfaces.
Default Configuration
There is no default configuration.
Command Mode
Privileged Exec mode and all configuration sub modes
—
Displays the statistics for the specified Ethernet (Physical)
Description
The transmission interval in seconds.
The number of times a keepalive packet
must be seen before a looped state is
declared.
Layer 2 Switching Commands
578