Show Iscsi Sessions - Dell N1100-ON Reference Manual

Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the iSCSI configuration.
console#show iscsi
iSCSI enabled
iSCSI CoS enabled
iSCSI vpt is 5
Session aging time: 10 min
Maximum number of sessions is 192
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
860 - -
3260 - -
30001 172.16.1.1iqn.1993-11.com.disk
vendor:diskarrays.sn.45678.tape:sys1.xyz
30033172.16.1.10
------------------------------------------------
iSCSI Static Rule Table
------------------------------------------------
Index TCP Port IP Address IP Address Mask
TCP Port Target IP AddressName

show iscsi sessions

Use the show iscsi sessions command to display the iSCSI status.
Syntax
show iscsi sessions [detailed]
detailed — Displayed list has additional data when this option is used.
•
Name
Layer 2 Switching Commands
541