Example
In this example, all static entries in the bridge-forwarding database are
displayed.
console#show mac address-table static
Vlan Mac Address
---- -------------- -----
1
0001.0001.0001 Static Gi1/0/1
show mac address-table vlan
Use the show mac address-table vlan command in User Exec or Privileged
Exec mode to display all entries in the bridge-forwarding database for the
specified VLAN.
Syntax
show mac address-table [vlan vlan-id]
•
—
vlan-id
Specify a valid VLAN; the range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
In this example, multiple classes of entries in the bridge forwarding database
are displayed.
console(config-if-Gi1/0/4)#show mac address-table vlan 1
Aging time is 400 Sec
Vlan
Mac Address
-------- --------------------- ----------- ---------------------
1
1418.7715.1BAA
Type
Port
-----
Type
Dynamic
Port
Gi2/0/29
Layer 2 Switching Commands
307