Attribute 25 - Dell N1100-ON Reference Manual

attribute 25

Use the attribute 25 command to enable the switch to send the RADIUS
Class attribute as supplied by the RADIUS server in accounting messages
sent to the specific accounting server.
Syntax
attribute 25 include-in-access-req
no attribute 25 include-in-access-req
Default Configuration
By default, the Service-Type is included in the accounting messages sent to
the accounting server.
Command Mode
RADIUS Server Configuration
User Guidelines
The switch sends the value supplied by the RADIUS server in the Class
attribute. The Class attribute may be up to 16 octets in length
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#conf
console(config)#radius-server host 4.3.2.1
console(config-auth-radius)#attribute 25 include-in-access-req
attribute 31
Use the attribute 31 command to alter the format of the MAC address sent to
the RADIUS server in the Calling-Station-Id attribute and the USER-NAME
attribute when authenticating using 802.1X MAC based authentication for
an interface. Use the no form of the command to return the MAC address
format to the default.
911
Security Commands