Dell N1100-ON Reference Manual page 159

Command
distance bgp (BGP Router
Configuration)
distance bgp (IPv6 Address
Family Configuration)
distribute-list prefix in
distribute-list prefix out
(BGP Router
Configuration)
distribute-list prefix out
(IPv6 Address Family
Configuration)
enable
ip as-path access-list
ip bgp-community new-
format
ip bgp fast-external-fallover
ip community-list
ip extcommunity-list
match extcommunity
maximum-paths (BGP
Router Configuration)
maximum-paths (IPv6
Address Family
Configuration)
Description
Sets the preference of BGP routes.
Sets the preference of BGP routes.
Configures a filter that restricts the routes that
BGP accepts from all neighbors based on
destination prefix.
Configures a filter that restricts the
advertisement of routes based on destination
prefix.
Applies an IPv6 prefix list to IPv6 routes
advertised via BGP.
Globally enables BGP.
Creates an AS path access list.
Displays BGP standard communities in AA:NN
format.
Configures fast external failover behavior for a
specific routing interface.
Creates or configures a BGP community list.
Creates an extended community list to
configure VRF route filtering.
Matches BGP extended community list
attributes.
Specifies the maximum number of next hops
BGP may include in an Equal Cost Multipath
(ECMP) route derived from paths received
from neighbors outside the local autonomous
system.
Limits the number of ECMP next hops in IPv6
routes from external peers.
Dell EMC Networking CLI
a
Mode
BR
IPAF
BR
IPAF
BR
IPAF
BR
GC
GC
IC
GC
GC
RM
BR
IPAF
159