Table of Contents
Advertisement
a.
For the meaning of each Mode abbreviation, see
Configuration and Image Files
Command
boot system
clear config
copy
delete
dir
erase
filedescr
rename
show backup-config
show bootvar
show running-config
show startup-config
write
a.
For the meaning of each Mode abbreviation, see
DHCP Client
Command
release dhcp
renew dhcp
Mode
Description
Specifies the system image that the switch loads
at startup.
Restores switch to default configuration.
Copies files from a source to a destination.
Deletes a file from a flash memory.
Prints the contents of the flash file system.
Erases the startup configuration, the backup
configuration, or the backup image.
Adds a description to a file.
Renames the file present in flash.
Displays contents of a backup configuration
file.
Displays the active system image file that the
switch loads at startup.
Displays the contents of the currently running
configuration file.
Displays the startup configuration file contents. PE
Copies the running configuration image to the
startup configuration.
Mode
Description
Forces the DHCPv4 client to release a leased
address.
Forces the DHCP client to immediately renew
an IPv4 address lane.
Types.
Types.
Dell EMC Networking CLI
a
Mode
PE
PE
PE
PE
PE
PE
PE
PE
PE
UE
PE
PE
a
Mode
PE
PE
199
Advertisement
Table of Contents
