Dell N1100-ON Reference Manual page 174

Command
ip dhcp relay information
check
ip dhcp relay information
check-reply
ip dhcp relay information
option
ip dhcp relay information
option-insert
ip helper-address (global
configuration)
ip helper-address (interface
configuration)
ip helper enable
show ip helper-address
show ip dhcp relay
show ip helper statistics
a. For the meaning of each Mode abbreviation, see
IP Routing
Command
encapsulation
ip icmp echo-reply
Description
Enables DHCP Relay to check that the relay
agent information option in forwarded
BOOTREPLY messages is valid.
Enables DHCP Relay to check that the relay
agent information option in forwarded
BOOTREPLY messages is valid.
Enables the circuit ID option and remote agent
ID mode for BootP/DHCP Relay on the system
(also called option 82).
Enables the circuit ID option and remote agent
ID mode for BootP/DHCP Relay on the circuit
ID option and remote agent ID mode for
BootP/DHCP Relay on the interface (also called
option 82).
Configures the relay of certain UDP broadcast
packets received on any interface.
Configures the relay of certain UDP broadcast
packets received on a specific interface.
Enables relay of UDP packets.
Displays the IP helper address configuration.
Displays the BootP/DHCP Relay information.
Displays the number of DHCP and other UDP
packets processed and relayed by the UDP relay
agent.
Mode
Description
Configures the link layer encapsulation type for
the packet.
Configures an IP address on an interface.
Types.
Dell EMC Networking CLI
a
Mode
GC
IC
GC
GC
GC
IC
GC
PE
UE or
PE
PE
a
Mode
IC
IC
174