Dell N1100-ON Reference Manual page 191

Command
nsf helper strict-lsa-
checking
nsf restart-interval
passive-interface
passive-interface default
redistribute (OSPFv3)
router-id
show ipv6 ospf
show ipv6 ospf abr
show ipv6 ospf area
show ipv6 ospf asbr
show ipv6 ospf border-
routers
show ipv6 ospf database
show ipv6 ospf database
database-summary
show ipv6 ospf interface
show ipv6 ospf interface
brief
show ipv6 ospf interface
stats
Description
Requires that an OSPF helpful neighbor exit
helper mode whenever a topology change occurs.
Configures the length of the grace period on the
restarting router.
Sets the interface or tunnel as passive.
Enables the global passive mode by default for all
interfaces.
Configures the OSPFv3 protocol to allow
redistribution of routes from the specified source
protocol/routers.
Sets a 4-digit dotted-decimal number uniquely
identifying the Router OSPF ID.
Displays information relevant to the OSPF
router.
Displays the internal OSPFv3 routes to reach
Area Border Routers (ABR).
Displays information about the area.
Displays the internal OSPFv3 routes to reach
Autonomous System Boundary Routes (ASBR).
Displays internal OSPFv3 routers to reach Area
Border Routers (ABR) and Autonomous System
Boundary Routers (ASBR).
Displays information about the link state
database when OSPFv3 is enabled.
Displays the number of each type of LSA in the
database and the total number of LSAs in the
database.
Displays the information for the IFO object or
virtual interface tables.
Displays brief information for the IFO object or
virtual interface tables.
Displays the statistics for a specific interface.
Dell EMC Networking CLI
a
Mode
ROSV3
ROSV3
IC
ROSV3
ROSV3
ROSV3
PE
PE
PE
PE
UE or
PE
PE
PE
PE
PE
UE
191