Show Interfaces Transceiver - Dell N1100-ON Reference Manual

--------- --------------- ------ ------- ---- ------ ----- - ---------------
Gi1/0/1
Gi1/0/2
Gi1/0/3
Gi1/0/4
Gi1/0/5
Gi1/0/6
Gi1/0/7
Gi1/0/8
Gi1/0/9
Oob Type
--- ------------------------------
oob Out-Of-Band
Port Description
Channel
------- ------------------------------ ------- - -------------------
Po1

show interfaces transceiver

Use the show interfaces transceiver command to display the optic static
parameters as well as the Dell EMC qualification.
Syntax
show interfaces transceiver [properties]
• properties—Displays the static parameters for the optics.
Default Configuration
This command has no default configuration.
Command Modes
User Exec, Privileged Exec modes.
User Guidelines
This command only supports the display of 10G and 40G transceivers.
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
N/A Unknown Auto Down
Link
State
-----
Up
Link
State
Down
Layer 2 Switching Commands
Off A 1
Off T (11),1,3,5,7,9
15,19,25-4093
Off A 1
Off G (1),2,4,6,8,10
14,16,20,22,24
Off A 1
Off A 1
Off A 1
Off A 1
Off A 1
M VLAN
H (4),5
408