Table of Contents
Advertisement
Example
In this example, all classes of entries in the bridge-forwarding database for
Gigabit Ethernet interface 1/0/1 are displayed.
console#show mac address-table interface gigabitethernet 1/0/1
Aging time is 300 Sec
Vlan Mac Address
---- -------------- ----
1
0000.0001.0000 Dynamic Gi1/0/1
1
0000.8420.5010 Dynamic Gi1/0/1
1
0000.E26D.2C2A Dynamic Gi1/0/1
1
0000.E89A.596E Dynamic Gi1/0/1
1
0001.02F1.0B33 Dynamic Gi1/0/1
show mac address-table static
Use the show mac address-table static command in User Exec or Privileged
Exec mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address mac-address] [interface interface-id]
[vlan vlan-id]
•
mac-address
•
—
interface-id
and port channels.
•
—
vlan-id
Specify a valid VLAN; the range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Type
Port
-------------
—
A MAC address with the format xxxx.xxxx.xxxx.
Specify an interface type; valid interfaces include Ethernet ports
Layer 2 Switching Commands
306
Advertisement
Table of Contents
