Dell N1100-ON Reference Manual page 111

Command
show system mtu
system jumbo mtu
a. For the meaning of each Mode abbreviation, see
Ethernet CFM
Command
ethernet cfm domain
service
ethernet cfm cc level
ethernet cfm mep level
ethernet cfm mep enable
ethernet cfm mep active
ethernet cfm mep archive-
hold-time
ethernet cfm mip level
ping ethernet cfm
traceroute ethernet cfm
show ethernet cfm errors
show ethernet cfm domain
Description
Displays the configured MTU.
Globally configures the Maximum Transmission
Unit (MTU) on all interfaces for forwarded and
system-generated frames.
Mode
Description
Enters into maintenance domain Configuration
mode for an existing domain. Use the optional
level parameter to create a domain and enter
into maintenance domain Configuration mode.
Associates a VLAN with a maintenance domain. MDC
Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
Enables a MEP at the specified level and
direction.
Activates a MEP at the specified level and
direction.
Maintains internal information on a missing
MEP.
Creates a Maintenance Intermediate Point
(MIP) at the specified level.
loopback message (LBM) from
Generates a
the configured MEP.
Generates a link trace message (LTM) from the
configured MEP.
Displays the cfm errors.
Displays the configured parameters in a
maintenance domain.
Types.
Dell EMC Networking CLI
a
Mode
PE
GC
a
Mode
GC
GC
IC
IC
IC
IC
IC
PE
PE
PE
PE
111