Table of Contents
Advertisement
Command
ip netdirbcast
ip policy route-map
ip redirects
ip route
ip route default
ip route distance
ip routing
ip unnumbered
ip unnumbered gratuitous-
arp accept
ip unreachables
match ip address
match length
match mac-list
route-map
set interface null0
set ip default next-hop
Description
nables the forwarding of network-directed
E
broadcasts.
Applies a route map on an interface.
Enables the generation of ICMP Redirect
messages.
Configures a static route. Use the no form of
the command to delete the static route.
Configures the default route. Use the no form
of the command to delete the default route.
Sets the default distance (preference) for static
routes.
Globally enables IPv4 routing on the router.
Identifies an interface as an unnumbered
interface and specifies the numbered interface
providing the borrowed address.
Enables installation of a static interface route to
the unnumbered peer upon receiving a
gratuitous ARP.
Enables the generation of ICMP Destination
Unreachable messages.
Specify IP address match criteria for a route
map.
Configures packet length matching criteria for a
route map.
Configures MAC ACL match criteria for a route
map.
Creates a policy based route map.
Routes packets to interface null 0.
Sets a list of default next-hop IP addresses
to be used if
no explicit route for the packet's
destination address appears in the routing table.
Dell EMC Networking CLI
a
Mode
IC
IC
IC
GC
GC
GC
GC
IC
IC
IC
RM
RM
RM
GC
RM
RM
175
Advertisement
Table of Contents
