Dell N1100-ON Reference Manual page 162

Command
neighbor route-map (IPv6
Address Family
Configuration)
neighbor route-reflector-
client (BGP Router
Configuration)
neighbor route-reflector-
client (IPv6 Address Family
Configuration)
neighbor send-community
(BGP Router
Configuration)
neighbor send-community
(IPv6 Address Family
Configuration)
neighbor shutdown
neighbor timers
neighbor update-source
network (BGP Router
Configuration)
network (IPv6 Address
Family Configuration)
redistribute (BGP)
redistribute (BGP IPv6)
Description
Specifies a route map to be applied to inbound
or outbound IPv6 routes.
Configures an internal peer as an IPv4 route
reflector client.
Configures an internal peer as an IPv4 route
reflector client.
Configures the local router to send the BGP
communities attribute in UPDATE messages to
a specific neighbor.
Tells BGP to send the COMMUNITIES
attribute with routes advertised to the peer.
Administratively disables communications with
a specific BGP neighbor.
Overrides the global keepalive and hold timer
values as well as set the keepalive and hold
timers for a specific neighbor.
Configures BGP to use a specific IP address as
the source address for the TCP connection with
a neighbor.
Configures BGP to advertise an address prefix. BR
Identifies network IPv6 prefixes that BGP
originates in route advertisements to its
neighbors.
Configures BGP to advertise routes learned by
means outside of BGP. BGP can redistribute
local (connected), static, OSPF, and RIP routes.
Configures BGP to redistribute non-BGP routes
from the IPv6 routing table.
Dell EMC Networking CLI
a
Mode
IPAF
BR
IPAF
BR
IPAF
BR,
IPAF
BR
BR
IPAF
BR
IPAF
162