Table of Contents
Advertisement
Syntax
show ip igmp snooping querier [detail | vlan vlan-id]
•
vlan-id —Specifies a VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
submodes
User Guidelines
When the optional argument vlan-id is not used, the command shows the
following information.
Parameter
IGMP Snooping
Querier
IGMP Version
Querier Address
Querier Query
Interval
Querier Expiry
Interval
When a value is given for vlan-id, the following information appears.
Parameter
IGMP Snooping
Querier VLAN
Mode
Description
Indicates whether or not IGMP Snooping Querier is active on
the switch.
Indicates the version of IGMP that will be used while sending
out the queries.
Shows the IP address that is used in the IPv4 header when
sending out IGMP queries. It can be configured using the
appropriate command.
Shows the amount of time in seconds that a Snooping Querier
waits before sending out the periodic general query.
Displays the amount of time to wait in the Non-Querier
operational state before moving to a Querier state.
Description
Indicates whether IGMP Snooping Querier is active on the
VLAN.
Layer 2 Switching Commands
486
Advertisement
Table of Contents
