Table of Contents
Advertisement
Operating the MAXI DOT display
Hold - display main menu
Press - return to a previous level in the menu
Turn - move in the selected menu
B
Press - confirm selected menu item
Note
Depending on equipment not all functions may be available. The system indi-
cates this using a text message on the Infotainment screen.
Driving data (Multifunction display)
Introduction
The driving data display is only possible with the ignition switched on. After
the ignition is switched on, the function that was last selected before switch-
ing off the ignition is displayed.
If vehicles with MAXI DOTdisplay do not show the driving data after switching
on the ignition, select the menu item Driving data in the main menu and confirm
» page
58.
The units can be adjusted in Infotainment in the menu
The journey data can be set/reset in Infotainment in the menu
Instrument cluster.
Note
The setting of the information display is stored in the active user account per-
sonalisation
» page
59.
Information Overview
Overview of driving data (depending on the vehicle equipment).
Range - drive distance in km which can be covered with the existing tank ca-
pacity and with the same driving style. If you drive more efficiently this value
can increase.
®
AdBlue
range - drive distance in km which can be covered with the existing
®
AdBlue
tank capacity and with the same driving style. If you drive more effi-
ciently this value can increase.
56
Using the system
Average fuel consumption - is calculated continuously since the last time the
memory was deleted. After erasing the memory, no data will appear for the
first 100 m driven.
Current fuel consumption - when the vehicle is stationary or slowly moving,
the fuel consumption is displayed in l/h (--,- km/l appears on models for some
countries).
Oil temperature - if the temperature is lower than 50 °C or if there is a fault in
the system for checking the oil temperature, the symbols are displayed.
Warning when the preset speed is exceeded - allows the setting of a speed
limit where, if exceeded, an acoustic warning signal and a warning message ap-
pears on the display of the instrument cluster.
Dynamic Road Sign Display - traffic signs display
ognition.
Current speed - digital speedometer.
Average speed - is calculated continuously since the last time the memory
was deleted. After erasing the memory, no data will appear for the first 300 m
driven.
Driving route - distance driven since the last time the memory was deleted.
/ → → Units.
Driving time - driving time since the last time the memory was deleted.
/ → →
Conv. consumers - information about the total consumption of the comfort
consumers in l/h and a list of three consumers (e.g. air conditioning etc.), which
have the largest share of fuel consumption.
Infotainment display
›
In Infotainment in the menu
» page
255, Traffic sign rec-
Fig. 48
Journey data
/ Tap on function surface → Driving data.
Advertisement
Table of Contents
