Table of Contents
Advertisement
WARNING (Continued)
Under certain circumstances, surfaces of certain objects and types of
■
clothing cannot reflect the system signals. There is a danger that such ob-
jects or people may not be recognised by the system sensors.
External noise sources may affect the signals of the system sensors.
■
There is a danger that obstacles may not be detected by the system sen-
sors.
Before reversing, make sure that there are is not any small obstacle, such
■
as a rock, thin post etc., in front of or behind your vehicle. Such obstacles
may not be recognised by the system sensors.
CAUTION
Keep the system sensors
» Fig. 270
■
and do not cover with any objects of any kind, otherwise the system function-
ing may be impaired.
Under adverse weather conditions (heavy rain, water vapour, very low or high
■
temperatures, etc.), the system function may be limited - "incorrect recogni-
tion of obstacle".
Accessories fitted to the vehicle rear, such as bicycle carriers, can impair the
■
system function.
Settings in Infotainment
Read and observe
and
›
In the infotainment system, in menu
ing and manoeuvring .
ParkPilot - Settings for the parking aid
■
Activate automatically - Activate/deactivate the compact parking aid display
■
(when driving forward)
Front volume - Adjust the volume of the beeps for obstacle detection in front
■
Front tone setting - Setting the pitch of the beeps for obstacle detection in
■
front
Rear volume - Set the volume level of the beeps for the rear obstacle detec-
■
tion
Rear tone setting - Setting the pitch of the beeps for the rear obstacle detec-
■
tion
224
Driving
on page 224 clean, snow-and ice-free
on page 223 first.
/ tap on function surface → Park-
Entertainment fading while parking – Lowers the audio volume (e.g. radio vol-
■
ume) with activated parking aid
Manoeuvre braking - Activation / deactivation of the automatic emergency
■
braking
Operation
Fig. 270 Installation location of the sensors on the left side of the vehi-
cle: front/rear
Read and observe
and
The system uses ultrasound waves to calculate the distance between the
bumper and an obstacle. The ultrasonic sensors are, depending on vehicle
equipment,, located in the back or in the front bumper
Depending on the equipment, the following system versions are possible
» Fig.
271.
Variant 1: warns of obstacles in areas
▶
▶
Variant 2: warns of obstacles in areas
▶
Variant 3: warns of obstacles in the areas
Fig. 271
Sampled areas and range of the
sensors
on page 223 first.
» Fig.
270.
,
.
C
D
A
,
B
,
C
,
D
.
,
,
,
,
.
A
B
C
D
E
Advertisement
Table of Contents
