Table of Contents
Advertisement
SmartLink
Introductory information
Introduction to the subject
Read in the QR
code» Fig.
217orenter the following address in the web brows-
er to open the website with information on the SmartLink communication sys-
tem.
http://go.skoda.eu/connectivity-smartlink
SmartLink offers the ability to display certified applications on an external de-
vice equipped with a USB device on the Infotainment screen and to operate
them.
SmartLink supports the following communication systems.
Android Auto
▶
Apple CarPlay
▶
®
MirrorLink
▶
Using the applications in the connected external device it is possible to use the
navigation to make a call, to listen to music.
For reasons of safety, the operation of some applications while driving is not
possible or only limited.
Depending on model of the connected external device, some applications can
be started using the voice activation, via the Infotainment screen, using the
operating elements on Infotainment or using the buttons on the multi-function
steering wheel.
To activate voice control for the connected external device, hold down
or hold down the button on the multifunction steering wheel.
180
Infotainment
Fig. 217
Information on SmartLink on the
ŠKODA websites
CAUTION
To establish the connection, it is necessary for the date and time in Infotain-
ment to be set correctly. If the date and time setting is based on the GPS sig-
nal, then problems may arise with establishing a connection with a poor GPS
signal reception.
Note
During the connection process, information messages may be displayed on
■
the Infotainment screen, and in the telephone display. These messages must
be observed and confirmed if necessary (e.g. Release of data transfer, enabling
the contact import, release of text messages).
We recommend that you use extension cords from ŠKODA Original Acces-
■
sories.
With some connected devices, it is necessary for the connected external de-
■
vice to be unlocked over the entire duration of the connection for trouble-free
functioning of the SmartLink function"".
Main menu
Fig. 218 Main menu: no connection/example of an active connection
›
to display the SmartLink main menu, tap on the sensor field
button.
›
or tap the sensor field
Main menu
Function surfaces
» Fig. 218
Available communications systems
A
Active connection
B
or
Display of information about SmartLink
and then the function surface .
or press the
Advertisement
Table of Contents
