Table of Contents
Advertisement
The USB input audio source can be connected directly or via a connecting ca-
ble.
›
To connect, insert the USB audio source into the appropriate input.
›
To disconnect the USB in the Media main menu, tap on the function surface
→ Tap on Remove safely.
›
Disconnect the audio source from the corresponding USB input.
Load USB audio source
With the ignition, the charging process starts automatically after the USB au-
dio source is connected (applies to audio sources where charging via the USB
connector is possible).
The charging efficiency can differ compared to the charging from the usual
mains power supply.
Depending on the type of the connected external device and the frequency of
use, the charging current may not be sufficient to charge the battery of the
connected device.
Some connected audio sources may not be recognised and cannot be charged.
CAUTION
USB extension cords, or reducers may impair the function of the connected
audio source.
Note
We recommend that you use extension cords from ŠKODA Original Accesso-
ries.
AUX input
Installation location of the AUX input
›
To connect, insert the plug of the AUX audio source into the appropriate
connector.
›
To disconnect, pull the plug out of the AUX audio source.
CAUTION
The AUX input must only be used for audio devices!
■
If an external audio source is connected to the AUX input, which is equipped
■
with an adapter for external power supply, the sound may be impaired.
158
Infotainment
» page
97.
Note
The 3.5 mm stereo jack plug is used for the AUX input.
■
We recommend that you use extension cords from ŠKODA Original Acces-
■
sories.
®
Bluetooth
player
Infotainment allows audio files of a connected Bluetooth
the A2DP and AVRCP audio profile.
With Infotainment, multiple devices can be paired using Bluetooth
one of them can be used as a Bluetooth
Connect /disconnect
›
®
To connect the Bluetooth
player with Infotainment- follow the same in-
structions as for pairing Infotainment with a
›
®
To disconnect the Bluetooth
player, end the connection in the list of paired
external devices
» page
170.
®
Replace Bluetooth
player (applies to Infotainment Amundsen, Bolero)
If you would like to replace a Bluetooth
ment as a Telephone at the same time, then a relevant information message
appears in the Infotainment screen.
›
End the connection to the currently connected Bluetooth
the pairing procedure
» page
170, Managing paired external devices.
CAUTION
If an external device is connected to Infotainment using Apple CarPlay
orAndroid Auto, then it cannot be connected using Bluetooth
Jukebox
Only applies to Infotainment Columbus.
In the Jukebox (in the internal Infotainment memory) Supported audio / video
files can be imported from connected external devices.
Import files
›
Tap on the function surface in the Media main menu → Manage jukebox →
Import.
›
Select the desired source.
›
Select the desired folders or files.
›
Tap on the function surface .
®
player to play using
®
, but only
®
player.
telephone» page
170.
®
Player which is connected to Infotain-
®
player and repeat
®
.
Advertisement
Table of Contents
