Table of Contents
Advertisement
Aligning to the vehicle position (in the 2D or 3D map display)
Alignment to the destination position (in the destination position dis-
play)
Centring and displaying the entire route (in the route display)
Options for map display in the split screen
Only valid for Infotainment Columbus.
Fig. 243 Map in split screen
›
In the split screen, tap on function surface
Depending on the context, some of the following function surfaces will be dis-
played in area
.
B
Map display with the route from the current vehicle location to the desti-
nation
Change the map orientation
2D - Two-dimensional map display
3D - Three-dimensional map display
Turn on/off the automatic change of scale
POIs display
The Infotainment system offers the possibility of displaying POI symbols on
the map on the Infotainment screen.
›
To activate/deactivate the display, go to the main Navigation menu and tap
on the function surface → POIs.
» Fig.
243.
A
›
To select the POIs to be displayed, go to the main Navigation menu and tap
on the function surface → Map → Select categories for POIs and select the de-
sired categories (max. 10).
Road sign display
Infotainment offers the option of displaying the traffic signs stored in the navi-
gation data or detected by the front camera during guidance on the Infotain-
ment screen
» Fig. 225
on page 187.
G
›
To switch on/off the road sign display in the main menu Navigation, tap the
function surface → Map → Show road signs.
For some vehicles it is possible to set an alert when exceeding the permitted
speed limit set by a road sign.
›
Tap the
sensor field and then the function surface → Driver assistance →
Speed warning:.
For trailer towing, we recommend that you activate detection of road signs
relevant to trailers.
›
Tap the
sensor field and then the function surface → Driver assistance →
Show road signs relevant to trailers.
Route guidance
Introduction to the subject
A routeis created by starting route guidance to a destination. Additional inter-
mediate destinations can be added to the route.
The route guidance takes place as follows
▶
Through graphical driving instructions in the Infotainment display screen and
in the display of the instrument cluster.
With navigation announcements.
▶
Infotainment tries to allow for continued guidance even if the navigation data
is incomplete or there is no data at all for the given area.
The route is recalculated each time if you ignore driving recommendations or
change the route.
197
Navigation
Advertisement
Table of Contents
