Waste container
Fig. 112 Waste container: inserting and moving/opening
Fig. 113 Replace bags
Read and observe
and
The waste container can be inserted into the slot in the door.
Insert waste container
›
Position the waste container at the front edge of the slot.
›
Push the waste container in the rear area in the direction of the arrow
» Fig.
112.
›
If required, push the waste container in the direction of arrow
Remove the waste container
›
Remove the waste container in the opposite direction to the arrow
» Fig.
112.
Open/close waste container
›
Lift the cover in the direction
C
98
Using the system
on page 94 first.
B
» Fig.
112.
Closing takes place in reverse order.
Replace bags
›
Remove the waste container from the slot.
›
Press the two locking lugs on the frame in the direction of arrow
›
Pull the bag together with the frame downwards in the direction of arrow
.
2
›
Remove the bag from the frame.
›
Pull the new bag through the frame and pull it over the bag frame in the di-
rection of arrow
›
Insert the bag containing the frame in the direction of arrow
tainer body, so that the two lugs engage audibly with the frame.
Note
We recommend that you use 20 x 30 cm bags.
Storage compartment underneath the front armrest
Fig. 114 Open tray / control air supply
A
.
A
.
3
» Fig.
113.
1
into the con-
4