Table of Contents
Advertisement
Turn signal and main beam
Control stalk positions
» Fig. 67
Switch on the right turn signal
Switch on the left turn signal
Switch on main beam (spring-tensioned position)
Switch off main beam / headlight flasher on (spring-tensioned position)
The main beam can only be switched on when the low beam lights are on.
The headlight flasher can be operated even if the ignition is switched off.
The turn signal switches off automatically depending on the steering angle af-
ter turning.
Use the control stalk to switch on/off the headlight
Comfort indicating
When the control talk is pressed slightly up or down, the respective turn signal
indicates three times.
If during the convenience turn signal, the operating lever is pressed in the op-
posite direction, the indicating will stop.
Convenience signalling can be activated/deactivated in Infotainment in the
menu
/ → → Light.
WARNING
Only turn on the main beam or the headlight flasher if other road users will
not be dazzled.
Fig. 67
Operating lever: Turn signal and
main beam operation
assistant» page
78.
Note
The setting (activation/deactivation) of the convenience turn signal is stored
(depending on the Infotainment type) in the active user account personalisa-
tion
» page
59.
Automatic driving light control
If the light switch is in position
switched on/off to suit current light or weather conditions (rain), depending on
the equipment.
If the light switch is in position , the lettering
light switch. If the light is switched on automatically, the symbol
nates next to the light switch.
Automatic driving light control in the rain (referred to as function in the
following)
The dipped beam is switched on automatically if the following conditions are
met.
The function is activated.
The light switch is in the position .
The windscreen wipers are on for more than 30 s.
The light turns off automatically about 4 minutes after turning off the wipers.
Setting, activation/deactivation
The following functions can be set or activated/deactivated in Infotainment in
the menu
/ → → Light.
Sensitivity adjustment of the sensor for determining the lighting conditions
▶
for automatic driving light control
▶
Automatic driving light control during rain
Fig. 68
Light switch: AUTO position
» Fig.
68, then the lights are automatically
illuminates next to the
also illumi-
Lights and visibility
75
Advertisement
Table of Contents
