Table of Contents
Advertisement
If route guidance is taking place at this moment using Infotainment, then this
is not terminated by starting the route guidance in the MirrorLink
Read the QR
code» Fig.
221orafter entering the following address in the web
browser, the website with information on supportedMirrorLink
opened.
http://go.skoda.eu/connectivity
main menu
Main menu - Functional surfaces and information
Return to SmartLink main menu
Displays a list of running applications with the ability to terminate them
Display the application last shown (as long as the application is running)/
show the display content of the connected external device
Settings of the SmartLink
» page 145
List of applications
A
Other pages with applications (by performing a finger movement side-
B
ways across the screen, other pages with applications are displayed)
Application is not certified for use while driving
Operation
Start the application
®
▶
In the Mirrorlink
connection main menu, select the desired application in the
field
» Fig. 222
on page 183.
A
The application starts and the following function surfaces are displayed.
®
- application.
®
applications is
Fig. 222
MirrorLink®: Main menu
» page 180
menu or
» page 150
Show function surfaces at the top/bottom (applies to Infotainment
Amundsen, Bolero)
Move the functional surfaces in the desired corner of the screen
(applies to the infotainment Swing)
®
Return to MirrorLink
main menu
Show/hide function surfaces (applies to Infotainment Amundsen, Bolero)
Press the control knob .
▶
Display of the running application
▶
In the main menu of the MirrorLink
» Fig. 222
on page 183 to display the last displayed application.
If you want to display a different application, then the function surface of the
desired application must be tapped in the main menu of the MirrorLink
nection
» Fig. 222
on page 183.
A
Ending the current application
Tap on the function surface → .
▶
Press the function surface of the desired application with the symbol .
▶
Tap the function surface Close all to close all running applications that support
this feature.
function problems
If problems occur with the MirrorLink
messages may occur on the screen.
Fault: Transfer - Disconnect and reconnect the external device
■
MirrorLink® audio is unavailable. - Disconnect and reconnect the external device
■
■
MirrorLink® availability on this mobile device is restricted. - The connected device can-
not be used while driving
The mobile device is locked. Please unlock the mobile device to use MirrorLink® - unlock
■
"the connected external device"
Unable to start app or app not working. - Disconnect and reconnect the external
■
device
®
connection, press the function surface
®
connection, then one of the following
SmartLink
®
con-
183
Advertisement
Table of Contents
