Table of Contents
Advertisement
Then a new route is calculated and route guidance starts.
Remove transit point
›
In the Navigation main menu, tap on the functional surface → Change route in
map.
›
Tap on function surface Delete waypoint.
›
Tap on the function surface .
Then a new route is calculated and route guidance starts.
route list
In the route list, it is possible to create routes, save, delete, or start navigation.
New route
›
In the Navigation main menu, tap on the function surface → Routes → New
route.
Insert a route destination in one of the following ways.
›
Tap on function surface Name destination and enter a new destination.
›
or: Tap on the function surface Destinations and select a destination from the
list of stored destinations.
›
To save the created route, tap the functional surface Store.
›
Tap the functional surface Startto start route guidance.
route import
A prerequisite for importing the route is that the Infotainment Online
services are activated.
A route that has been created in the user profile on the ŠKODA Connect Portal
website and sent to the Infotainment system can be imported into the Info-
tainment memory even before switching on the ignition .
If the route was created while the ignition was switched on and was sent to
the Infotainment system, Infotainment only offers to import this route after
the ignition has been switched off (for at least 15 minutes) and after it is
switched on again.
›
Switch on the ignition. When a new route is available, a message regarding
the option to import this route appears in the Infotainment screen automati-
cally .
If the user opts not to import the route immediately, the route can be impor-
ted later manually as follows.
202
Infotainment
›
In the Navigation main menu, tap on function surface → Routes Tap to
check if a new route is available.
›
or: Tap the
sensor field and then the function surface → .
›
The function surface import routes Tap.
If a new route available, then a message is displayed on the Infotainment.
›
Tap the function surface Retrieveto start route guidance.
After being successfully imported, the route is displayed in the list of saved
routes.
Managing saved routes
›
In the Navigation main menu, tap on the functional surface → Routes .
›
Choose the desired route, and then select one of the following functions.
Delete
Clear saved route
Edit
- Edit the route
Start
- Calculate the route and start route guidance
tion and start route guidance
Waypoint mode
Introduction to the subject
Only valid for Infotainment Columbus.
» page 11
This mode is suitable for off-road navigation or for areas where maps are not
available.
Infotainment allows the recording of waypoint tours driven using automatic of
manually entered waypoints.
Then there is the option to start route guidance to the stored waypoint tour or
to save the waypoint tour on the SD card.
» page
200, Route schedule
» page
198, Route calcula-
Advertisement
Table of Contents
