Table of Contents
Advertisement
WARNING
Be care with the adapter - otherwise there is a risk of finger injury.
Attach to the storage compartment in the rear armrest
Fig. 136 Open storage compartment / stowage compartment for hold-
er / remove holder
Read and observe
on page 106 first.
›
To insert, hold the lid on the recess
row
» Fig.
136.
›
Insert the holder in the stowage compartment
›
To remove, pull the securing tab
in direction of arrow out of the adapter.
›
Fold the cover closed against the direction of the arrow.
Handling the holder
Fig. 137 Tilting and rotating the holder
and fold open in the direction of ar-
A
until it stops.
B
in direction of arrow and take the holder
C
Read and observe
on page 106 first.
The holder may be by 30° in the direction of the arrow
in the direction of arrow
turned
2
›
To adjust the holder size, pull out the securing tab
row
and push the part
in the direction of arrow
3
B
tion
» Fig.
138.
Note
If there is no external device in the holder, then we recommend that the part
is moved fully down. Otherwise, irritating noises may occur at certain
B
speeds.
Fig. 138
Adjusting the holder size
tipped and by 360°
1
» Fig.
137.
in the direction of ar-
A
to the desired posi-
4
Practical features
107
Advertisement
Table of Contents
