Table of Contents
Advertisement
Insert a contact in the recipient list
Enter the telephone number
Return to view the message
Tap on the Find function surface to open a list of available telephone contacts.
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen.
Recipient list
The following functions can be executed by tapping on one of the functional
surfaces.
Display contact list with the option of adding/removing additional re-
cipients (tap on the function surface to return to the recipient list )
Removal of the contact from the recipient list
Sending the message
Return to view the message
Received text message
When you receive a new message, the number of new messages received is
displayed next to the function surface and at the same time the symbol is
displayed in the status bar.
›
To open a list of received messages, go to the Telephone main menu and
tap on function surface → .
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by Infotainment's generated voice
Display a menu with additional options
Reply with template - Reply using a template
▶
▶
Delete current text message - Distance of displayed text message (applies to
Infotainment Columbus, when the SIM card is inserted in the external
module or the telephone is connected via the Bluetooth
▶
Display numbers - Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forwarding a message with the option to edit the message before sending
Reply to the sender via a message
Hotspot (WLAN) and data connection
Hotspot (WLAN)
Introduction to the subject
Applies to Infotainment Columbus, Amundsen.
WLAN can be used to connect to the Internet, to playback audio files in the
menu media (if the connected external device allows this) or for operating In-
fotainment using an application in the external device (e.g. ŠKODA Media
Command).
The requirement for the WLAN function is the ignition is switched on. After
switching on the ignition, the last-used WLAN connection appears.
It is possible to connect up to 8 external devices on the Infotainment hotspot
and at the same time to connect Infotainment to the hotspot of other exter-
nal devices.
If there is a SIM card with activated data service in the external module of In-
fotainment Columbus or there is a connection to the telephone via Blue-
®
tooth
profile RSAP, the external device cannot be connected to the hotspot.
Connecting an external device to the Infotainment system's WLAN
Hotspot
Turn Infotainment hotspot on / off
›
Tap the
hotspot → Mobile hotspot.
Set Infotainment hotspot
▶
Tap the
Hotspot → Hotspot (WLAN) settings.
▶
Set the required menu items from the following menu.
Security level: - WPA2 connection protection always set
■
®
-profile rSAP)
Network key - Input of the access password
■
SSID: ... - Name of the infotainment hotspot
■
Do not send network name (SSID) -Turn Infotainment hotspot visibility on/off
■
▶
Tap the functional surface Store to save the parameters of the Infotainment
hotspot.
sensor field and then the function surface → WLAN → Mobile
sensor field and then the function surface → WLAN → Mobile
Hotspot (WLAN) and data connection
177
Advertisement
Table of Contents
