Table of Contents
Advertisement
Disconnection of the active connection
Settings of the SmartLink
» page 145
Connection set-up
Connect the external device via a connecting cable to the USB in-
▶
put» page
97.
▶
In the main SmartLink menu, select the type of communication system
» Fig. 218
or the connected external device
Disconnection of the active connection
To end the connection, in theSmartLinkmain menu, the functional surface .
▶
or: Disconnect the cable from the USB port.
▶
If the connection was ended by pressing the function surface , then it is
necessary to establish the connection again when the external device is con-
nected again.
Android Auto
Introduction to the subject
The Android Autoconnection can be set up under the following conditions.
The ignition is switched on.
Infotainment is switched on.
The external device to be connected is switched on.
Some applications require the data connection in the connected external de-
vice to be turned on.
If Infotainment connected to an external device via Android Auto then all the
telephones currently connected, as well as the Bluetooth
nected.
The external device to be connected will automatically establish a new tele-
®
phone connection via Bluetooth
Connecting an additional telephone using the telephone services of the SIM
card inserted in the external module is not possible over the duration of the
connection.
A possible data connection using the SIM card inserted in the external module
remains operational
» page
179.
menu or
» page 150
» Fig.
218.
B
®
Players are discon-
as a main telephone.
An external device connected using Android Auto cannot be used as an audio
source in the menu Media.
If route guidance is taking place at this moment in Infotainment, then there
is the option to start the route guidance in the Android Auto application. This is
also true reciprocally.
A
A list external of devices, supported regions and applications that the Android
Auto connection supports can be found on the websites of Google Inc.. Func-
tionality is not guaranteed outside of the supported regions.
main menu
Main menu - Functional surfaces and information in the area
Navigation applications
Telephone applications
Overview regarding current applications, telephone calls, accepted text
messages, tasks in the working directory, weather or similar.
Music applications
Display of other available applications as well as the option of returning to
the SmartLink main menu
Start the application
▶
Tap on the functional surface of the desired application to launch the appli-
cation.
The symbol appears next to the function surface in the area
then, after tapping on this function surface again, a list of new applications is
displayed.
Fig. 219
Android Auto: main menu
A
appears and
A
181
SmartLink
Advertisement
Table of Contents
