Changing the bulb for the front turn signal light
Fig. 368 Changing the bulb for the front turn signal light
Read and observe
and
›
Remove the protective cap
A
›
Remove the holder with the bulb by jiggling it out in the direction of the ar-
row
» Fig.
368.
1
›
Hold the holder with the bulb in the locations shown by the arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the holder until it stops.
›
Slide the holder with the bulb with the fixing lug
into the recess on the reflector.
›
Fit the protective cap
» Fig. 367
A
Removing bulbs for low and main beam
Fig. 369 Removing bulbs for low and main beam
on page 306 first.
» Fig. 367
on page 306.
upwards so that it fits
B
on page 306.
Read and observe
›
Remove the protective caps
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
›
Remove the bulb from the holder in the direction of the arrow
›
Insert a new bulb into the connector so that the lug
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
›
Use the protective caps
.
2
and
on page 306 first.
and
» Fig. 367
on page 306.
B
C
A
.
2
and
» Fig. 367
on page 306.
B
C
Fuses and light bulbs
» Fig.
369.
1
.
2
.
3
on the connector
307